Ceramic Wear Sleeves and Carbide Bottom Sleeves
Piston wear sleeves, bottom sleeves and MWD tool sleeves in tungsten carbide and zirconia, ground to your dimensions.
- Serving Industry Since 1987
- MWD Parts Stocked for Same-Day Shipping
- Carbide and HIP Zirconia
- Made to Your Drawing
Wear Sleeves We Supply
Stock MWD pulser sleeves plus custom sleeves for pumps, valves and downhole tools.
Piston Wear Sleeves
MWD pulser piston wear sleeves, stocked for same-day shipping.
Carbide Bottom Sleeves
Tungsten carbide bottom sleeves ground to your print for downhole service.
MWD Tool Sleeves
HIP zirconia sleeves for MWD oilfield tools where toughness matters.
Custom Wear Sleeves
Carbide and ceramic sleeves and bushings for pumps and valves.
Carbide or Zirconia?
Tungsten carbide sleeves give the most abrasion resistance. We use 12% cobalt and 6% nickel binder grades depending on corrosion exposure.
HIP zirconia offers high fracture toughness, high edge retention and a low coefficient of friction, with use temperatures up to 750 degrees C. It is a strong choice for MWD sleeves and gap sub rings.
Tell us the application and we will recommend the material.
| Tungsten carbide | 12% cobalt / 88% WC and 6% nickel / 94% WC |
|---|---|
| HIP zirconia | High fracture toughness, Rc72 hardness, up to 750 degrees C |
| Typical parts | Piston wear sleeves, bottom sleeves, MWD sleeves, bushings |
| Availability | MWD pulser sleeves stocked for same-day shipping |
From Drawing to Finished Part
Send a Drawing
Upload a print, photo or part number, or describe the part.
We Review the Application
We match the material and grade to your operating conditions.
Receive Your Quote
Pricing, lead time and any questions on tolerances.
Parts Delivered
Finished parts shipped to your shop or job site.
Quote Your Wear Sleeves
The more detail you send, the faster we can quote. Helpful to include:
- Drawing, photo or part number
- OD, ID and length
- Material preference: carbide or zirconia
- Quantity and when you need them
Send Your Drawing or Specs
Our team reviews every request and follows up with a quote or questions.
Wear Sleeve Questions
What materials do you make wear sleeves from?
Tungsten carbide in 12% cobalt or 6% nickel binder grades, and HIP zirconia. Carbide gives the most abrasion resistance; HIP zirconia adds high fracture toughness and a low coefficient of friction.
Do you stock MWD piston wear sleeves?
Yes. Our MWD pulser wear parts, including piston wear sleeves, are stocked for same-day shipping.
What is the lead time for HIP zirconia sleeves?
Custom HIP zirconia parts typically take 7 to 8 weeks. We confirm lead time with your quote.
Have a Drawing or Part Specification?
Send the details and we’ll evaluate material fit and quote the part.