Custom Zirconia Ceramic Parts
The toughest commercially available ceramic, for pump pistons and plungers, balls and seats, bushings and valve trim. Yttria- and MgO-stabilized and HIP grades.

- Serving Industry Since 1987
- Yttria- and MgO-Stabilized Grades
- HIP Zirconia Available
- Made to Your Drawing
Zirconia Parts We Supply
Custom zirconia parts for oilfield, pumping and industrial wear applications.
Pump Pistons and Plungers
Zirconia pump pistons and ultra-high-pressure pumping elements such as waterjet plungers.
Balls and Seats
Sucker rod balls and seats and high-pressure ball valve balls.
Bushings and Valve Trim
Wear bushings, valve trim and orifice plates.
Rollers, Guides and Blades
Guide rollers and sleeves, extrusion dies and ceramic blades.
The Toughest Commercial Ceramic
Zirconium oxide is the toughest commercially available ceramic, with high strength, excellent wear and corrosion resistance and a very low coefficient of friction.
We offer MgO-stabilized and yttria-stabilized grades. Zirconia can also be hot isostatic pressed (HIP) for added strength and edge retention.
HIP zirconia has use temperatures up to 750 degrees C, high fracture toughness and Rc72 hardness.
| Grades | Yttria-stabilized, MgO-stabilized, HIP zirconia |
|---|---|
| Strengths | Toughness, strength, wear and corrosion resistance, low friction |
| HIP zirconia | Up to 750 degrees C, Rc72 hardness |
| Typical parts | Pump pistons, plungers, balls, seats, bushings, valve trim, orifice plates, guide rollers |
| Lead time | HIP zirconia typically 7 to 8 weeks |
From Drawing to Finished Part
Send a Drawing
Upload a print, photo or part number, or describe the part.
We Review the Application
We match the material and grade to your operating conditions.
Receive Your Quote
Pricing, lead time and any questions on tolerances.
Parts Delivered
Finished parts shipped to your shop or job site.
Quote Your Zirconia Parts
The more detail you send, the faster we can quote. Helpful to include:
- A drawing, photo or part number
- Material or grade, if you know it
- Operating conditions: temperature, pressure, media
- Quantity and when you need them
Send Your Drawing or Specs
Our team reviews every request and follows up with a quote or questions.
Zirconia Questions
What is the difference between yttria- and MgO-stabilized zirconia?
Both are tough, wear-resistant zirconia grades. The right one depends on temperature, chemical exposure and the part. Tell us about the application and we will recommend a grade.
What is HIP zirconia?
HIP zirconia is hot isostatic pressed for added strength and edge retention. It offers high fracture toughness, Rc72 hardness and use temperatures up to 750 degrees C.
Do you make zirconia pump pistons and plungers?
Yes, including ultra-high-pressure pumping elements such as waterjet plungers, made to your drawing.
What is the lead time for zirconia parts?
HIP zirconia parts typically take 7 to 8 weeks. We confirm lead time with your quote.
Have a Drawing or Part Specification?
Send the details and we’ll evaluate material fit and quote the part.