Custom Ceramic Parts Made to Your Drawing
Send a drawing or describe the application. We help you choose the right advanced ceramic and deliver finished, custom-machined parts.
- Serving Industry Since 1987
- Rapid Prototypes in 2 to 3 Weeks
- Most Commercial Ceramic Grades
- Finish Ground in the US
Custom Ceramic Components
From single prototypes to production parts, made from the ceramic that fits your application.
Parts Made to Drawing
Custom machined ceramic parts built to your print and tolerances.
Rapid Prototypes
Solid ceramic prototypes cut from our stock of plates, tubes, bars and rods.
Wear Components
Guide rollers, nozzles, sleeves, bushings and grinding media for abrasive service.
Oilfield Components
MWD parts, poppets, balls, sleeves and frac plug buttons.
One Supplier for Most Advanced Ceramics
Most ceramics companies specialize in one or two grades of material. We are knowledgeable in most commercial grades of advanced ceramics, so we can recommend the right one for your part.
We source raw blanks and do finish grinding in the US, which lets us produce high-quality parts at a competitive price.
Prototype development averages 2 to 3 weeks, often without tool charges.
| Alumina | 90% to 99.5% purity |
|---|---|
| Zirconia | Yttria- and MgO-stabilized, HIP grades |
| Silicon nitride | Toughness, hardness, thermal shock resistance |
| Silicon carbide | Hardness and corrosion resistance |
| Boron nitride | Insulators and high-temperature parts |
| Tungsten carbide | 12% cobalt and 6% nickel grades |
From Drawing to Finished Part
Send a Drawing
Upload a print, photo or part number, or describe the part.
We Review the Application
We match the material and grade to your operating conditions.
Receive Your Quote
Pricing, lead time and any questions on tolerances.
Parts Delivered
Finished parts shipped to your shop or job site.
Quote Your Custom Ceramic Part
The more detail you send, the faster we can quote. Helpful to include:
- A drawing, photo or part number
- Material or grade, if you know it
- Operating conditions: temperature, pressure, media
- Quantity and when you need them
Send Your Drawing or Specs
Our team reviews every request and follows up with a quote or questions.
Custom Ceramic Part Questions
Can you make a ceramic part from my drawing?
Yes. Send your drawing with the quantity and how the part is used, and we will recommend a material and quote the part.
Which ceramic should I use?
It depends on wear, impact, temperature, chemicals and electrical needs. Alumina is economical and insulating, zirconia is the toughest, silicon nitride handles thermal shock, and tungsten carbide resists heavy abrasion. Tell us about the application and we will recommend one.
How fast can you make a ceramic prototype?
Prototype development averages 2 to 3 weeks, often without tool charges, because we cut prototypes from our stock of plates, tubes, bars and rods.
Do you make low quantities?
Yes. We make prototypes and small runs as well as production quantities.
Have a Drawing or Part Specification?
Send the details and we’ll evaluate material fit and quote the part.