Ceramic Sandblast Nozzles and Wear Nozzles
Long-life nozzles in alumina, tungsten carbide and silicon nitride for abrasive blasting, slurries and high-pressure water.

- 30+ Years of Ceramic Expertise
- Alumina, Carbide and Silicon Nitride
- Made to Your Drawing
- Help Choosing the Right Material
Nozzles for Abrasive Service
The ultra-high hardness of these ceramics is what gives our nozzles their long service life.
Sandblast Nozzles
Abrasive blasting nozzles that hold their bore far longer than steel.
Slurry and Mining Nozzles
Nozzles for slurries and abrasive sand in mining service.
Petrochemical Nozzles
Wear-resistant nozzles for petrochemical and industrial processes.
High-Pressure Water
Nozzles for garnet and high-pressure water applications.
Match the Ceramic to the Abrasive
Nozzles are typically made from one of three materials: low-cost alumina, tungsten carbide, or high-performance silicon nitride.
Ceramic is the right choice when a nozzle handles slurries, abrasive sand, garnet or high-pressure water.
With more than 30 years of ceramic experience, we can help you pick the best material for your nozzle and budget.
| Alumina | Low-cost option for general abrasive service |
|---|---|
| Tungsten carbide | High hardness and toughness for heavy blasting |
| Silicon nitride | High-performance option with thermal shock resistance |
| Industries | Sandblasting, petrochemical, mining |
| Supplied | Made to your drawing or sample |
From Drawing to Finished Part
Send a Drawing
Upload a print, photo or part number, or describe the part.
We Review the Application
We match the material and grade to your operating conditions.
Receive Your Quote
Pricing, lead time and any questions on tolerances.
Parts Delivered
Finished parts shipped to your shop or job site.
Quote Your Ceramic Nozzles
The more detail you send, the faster we can quote. Helpful to include:
- Nozzle drawing, photo or part number
- Bore and orifice dimensions
- Media: sand, garnet, slurry or water, and pressure
- Quantity and when you need them
Send Your Drawing or Specs
Our team reviews every request and follows up with a quote or questions.
Ceramic Nozzle Questions
What materials are ceramic nozzles made from?
Typically low-cost alumina, tungsten carbide, or high-performance silicon nitride. The right choice depends on the abrasive, pressure and budget.
When should I use a ceramic nozzle instead of steel?
Ceramic is recommended for nozzles handling slurries, abrasive sand, garnet or high-pressure water, where its very high hardness gives much longer service life.
Can you match my existing nozzle?
Yes. Send a drawing, photo or sample with the bore dimensions and we will quote a matching nozzle.
Have a Drawing or Part Specification?
Send the details and we’ll evaluate material fit and quote the part.